As the title implies, this architecture illustration tutorial doesn’t use a rendering engine. I have done a few other tutorials in the past that don’t involve a rendering program, however this tutorial does things a little differently, and in less time. You will probably notice some similarities to the Ambient Occlusion tutorial I posted a while back. I realized after making the ambient occlusion tutorial that I could take advantage of the export options of Sketchup, and use the line work of the model to generate the shading. Because of this, the process is extremely streamlined and can be done in minutes.

 

 

 

Here’s how it works,

1. In Sketchup, save a view/scene that you want to use for the illustration that way you can get back to the same view later if need be.

2. Switch the Face Style to “HIDDEN LINE”. Under VIEW>EDGE STYLE, check “DISPLAY EDGES.” Make sure shadows are off.

 

1_linework_export_alex_hogrefe_rendering_tutorial

 

 

 

3. Go to FILE>EXPORT>2D GRAPHIC and save the image as a JPEG.

 

4. With the Face Style still set to “HIDDEN LINE”, turn ON shadows and again export the image as a JPEG.

 

1_linework_shadow_export_alex_hogrefe_rendering_tutorial

 

 

 

5. Now, switch the face style from “Hidden Line” to “Shaded with Texture.” Again, export the image as a JPEG.

 

1_color_export_alex_hogrefe_rendering_tutorial

 

 

 

6. With the 3 images complete, it’s time to combine them in Photoshop. Begin by opening the first image (Sketchup export with only line work, no shadows) in Photoshop. Right click on the background layer (Click in the space next to name of the layer) and choose “Duplicate Layer”.

 

1_open_duplicate_alex_hogrefe_rendering_tutorial

 

 

 

7. At the top, select “FILTER>BLUR>GAUSSIAN BLUR”.

 

2_guassian_blur_alex_hogrefe_rendering_tutorial

 

 

8. When the dialogue box appears, choose a radius of about 6.5. This number may need to change depending on the resolution of your image.

 

2_guassian_blur_amount_alex_hogrefe_rendering_tutorial

 

 

9. With the lines now blurred, we need to darken them. I prefer to use levels although you can probably get away with adjusting the contrast. For levels, go to “IMAGE>ADJUSTMENTS>LEVELS”. Move the left black triangular slider to the right until the line work darkens to almost black.

 

3_2_levels_movement_alex_hogrefe_rendering_tutorial

 

 

Below, is what the image should look like at this stage:

 

4_current_look_alex_tutorial_rendering

 

 

 

10. Next, duplicate the layer just created and move the new layer to the top. This duplicated layer will be blurred again using the Gaussian Blur Filter. However, use a higher radius such as 35 this time.

 

5_guassian_blur_again_amount_alex_hogrefe_architecture

 

 

 

11. I want the original line work layer to show through the two, now blurred, layers just created. To do this, select the two blurred layers and set the layer blend mode to “Multiply”.

 

6_multiply_alex_hogrefe_architecture

 

 

 

12. The next step is sort of the “secret sauce” of the tutorial. Open the Sketchup exported image that showed both the line work and shadows. Drag the new layer to the top layer. Set the Layer Blend mode to “Hard Light”.

 

7_shadow_export_alex_hogrefe_architecture

 

8_hard_light_alex_hogrefe_architecture

 

 

 

 

13. To add some color to the image, open the Sketchup exported image that had the face style “Shaded with Textures” turned ON. Drag the new layer to the bottom, just above the “Background” layer.

 

9_color_export_alex_hogrefe_architecture

 

91_add_color_bottom_export_alex_hogrefe_architecture

 

 

 

14. I like to add color overlays to my illustrations to give them more of a mood. Create a new layer and move it to the top layer. Select the “Brush Tool”, and adjust its settings to have 0 Hardness as well as lower the opacity down to 25 to 30%. Begin painting in color in areas you want more color.

 

92_color_overlay_alex_hogrefe_architecture

 

 

15. Set the Layer Blend mode to “Overlay”.

 

93_color_overlay_alex_hogrefe_architecture

 

 

 

16. One last thing, I want the shadows to be a little more darker. To do this, select the layer with lines and shadows that was set to “Hard Light” in Step 12, and “Duplicate” it. Now, select the new duplicated layer and change the Layer Blend mode from “Hard Light” to “Multiply”. You can adjust the layer opacity if the shadows are too strong.

 

94_shadow_multiply_alex_hogrefe_architecture

 

 

That’s it! It may seem like a lot of steps, but I think once you go through them a few times, you will realize they are relatively simple and the whole illustration can be created in a matter of minutes.

For the final shot below, I added some vignetting (tutorial HERE). I also overlayed another exported Sketchup image with the face style set to “Xray” mode for a more detail in the light areas of the illustration.

 

Final_alex_hogrefe_architecture_render_tutorial